Please read carefully before you printing.

Notes for handling Stencil Inc.
• Have room well ventilated.
• Keep away from flame, heat and static discharge sources.
• If splashed in eyes flush with water.
• After stencil, flush contacted skin with water and wash with mild soap.
• Keep out of reach children.
• Store between 40°-120°F(4°- 49°C).
Note) For several years, it has become extremely difficult to export liquids containing stencil ink to prevent terrorism. We apologize for the inconvenience, but we are currently suspending sales of stencil ink. Until the situation improves and sales resume, please obtain similar inks near you and keep enjoy printing.

1) Settle Name Tape by Scotch tape along the two lines at the back of Stencil Board.

2) Using Stencil Brush, apply Stencil Ink from front side. Don't try to print in one time with too much ink to get fast result. We recommend you to print dividing 4 to 5 times with little ink, and make name tape dry by Drier after each printing to avoid deplorable mistake.
tip-1) A bottle of stencil Ink must be shaken well before printing.
tip-2) Too much ink makes name/words spreads badly. Adjust ink by Kitchen paper before printing. Previous practice is recommended before printing on your name tapes.

3) Confirm if the printing done well, before remove Name Tape from Stencil Board. Name Tape must be settled back in same position on the Stencil Board when you find the printing is not good enough.

4) Completion!!